Quick Answer: How Do I Fix My Telstra NBN WiFi?

Broadband & nbn™

  • Restart your computer and modem.
  • Reset the wireless modem to factory settings.
  • To do this, use a paperclip (or something similar) to press and hold the reset hole at the back of your Telstra modem, and keep it pressed in for 15 seconds.
  • Allow 2-5 minutes for the modem to reconnect to the internet.

Why is my Telstra WiFi not working?

A blinking green light usually means that data is being transmitted through the connection, so if the Wi-Fi light is blinking green, it means a device is already ‘talking’ to your modem. A red light usually means it can’t connect to the network. If this does not occur, reboot your Telstra-supplied Modem.

How can I improve my NBN WiFi?

Fortunately, there are a few quick changes you can make that might just improve your connection or speed.

  1. Choose the Right Router.
  2. Position Your Router Carefully.
  3. Pick the Right Frequency.
  4. Change the Wireless Channel.
  5. Check Your Connected Devices.
  6. Password Protect Your Network.
  7. Get a Range Extender.
  8. Want to Talk nbn?

Why is my NBN WiFi not working?

Troubleshooting. Locate your indoor NBN™ equipment – this will be a Connection Box plugged into your outdoor antenna’s wall outlet and an electrical outlet. Using an Ethernet cable, connect a computer directly to the active UNI-D port on your NBN™ Connection Box to rule out any WiFi issues.

How do I fix my WiFi modem?

Steps

  • Restart your computer.
  • Ensure that your laptop’s wireless adapter is enabled.
  • Restart your Internet modem and router.
  • Perform a soft reset on your network.
  • Perform a hard reset on your network.
  • Move closer to the router.
  • Make sure that you have a clear line-of-sight between you and the router.
  • Try using Ethernet.

Why is my Internet connection not working?

WiFi connected but no Internet: Start with the router

On the other hand, if the Internet doesn’t work on other devices too, then the problem is most likely with the router or the Internet connection itself. One good way to fix the router is to restart it. Turn on the modem and one minute later turn on the router.

Why would my internet not be working?

Reset modem and router

It is not uncommon for a DSL modem, cable modem, or network router to encounter problems that prevent one or more devices from connecting to the network. Wait several minutes for the modem and router to reconnect to the Internet, then test the Internet connection on your computer.

How can I get better Internet signal in my house?

Top 10 Ways to Boost Your WiFi

  1. Select a Good Place for Your Router.
  2. Keep Your Router Updated.
  3. Get a Stronger Antenna.
  4. Cut Off WiFi Leeches.
  5. Buy a WiFi Repeater/ Booster/ Extender.
  6. Switch to a Different WiFi Channel.
  7. Control Bandwidth-Hungry Applications and Clients.
  8. Use the Latest WiFi Technologies.

How can I increase my internet speed at home?

Download faster: How to speed up your internet

  • Test a different modem/router. The biggest cause of slowed down internet is a bad modem.
  • Scan for viruses.
  • Check for on-system interference.
  • Check your filters.
  • Try getting rid of your cordless phone.
  • Plug in.
  • Check for external interference.
  • Check for Foxtel or other types of TV.

Is NBN 50 fast enough?

NBN 50: With a maximum download speed of 50Mbps and an upload speed of 20Mbps, this tier is more than enough to meet most households’ entertainment, gaming and regular surfing needs.

What to do if NBN not working?

Here’s what to do if there’s no dial tone on your home phone that’s connected to the nbn network.

  1. Check for outages. Make sure there are no phone outages in your area.
  2. Try these troubleshooting steps. Make sure all your phone handsets are properly hung up.
  3. Restart your modem.
  4. Restart your nbn Connection Box.

How do I reset my Telstra NBN?

Broadband & nbn™

  • Restart your computer and modem.
  • Reset the wireless modem to factory settings.
  • To do this, use a paperclip (or something similar) to press and hold the reset hole at the back of your Telstra modem, and keep it pressed in for 15 seconds.
  • Allow 2-5 minutes for the modem to reconnect to the internet.

How do I know if NBN is working?

To know that it has been activated and working, you will be able to access the internet and phone through it. If you currently have ADSL internet and are being switched over, the ADSL will stop working, then the FTTP connection should start shortly afterwards.

What do I do if my WiFi isnt working?

Take a look at these tips to quickly get your online lollygagging back in order:

  1. Try a Different Device. Try another device, such as a smartphone or a table, and see if it will connect to Wi-Fi.
  2. Check Your Internet Connection.
  3. Look at Your Router and Modem.
  4. Reconnect to your Wifi network.
  5. Call Your Service Provider.

What do I do if my WiFi is connected but no Internet access?

WiFi Connected But No Internet Access – 12 Solutions to fix the issue

  • Check if the Ethernet cable is properly connected to WAN port of your router.
  • Reboot Your Router.
  • Turn off Your Antivirus.
  • Change Wireless Channel.
  • Change Region on Router.
  • Change 802.11 b\g\n Standard for WiFi.
  • Ensure You Have Proxy Disabled.

How do I get free WiFi at home?

How to Get Free WiFi Anywhere

  1. Share Your Smartphone’s Internet Connection. If you have a smartphone and a mobile data plan, you should be able to create a mobile WiFi hotspot to share your 3G or 4G connection with your other devices.
  2. Use a Hotspot Database App.
  3. Buy a Portable Router.
  4. Visit Popular WiFi Hotspot Locations.
  5. Look for Hidden WiFi Networks.